Thanks a lot! In so little time, I have already found a replacement and
tips on replacing it. This list rocks!
-James
>>I'll check into that as well. But there is another problem. How do I get
>>it off the replacement machine without damaging it? And I am now hesitant
>
>When you have the two halves of the MP apart, the IR shield just falls out.
>There's nothing holding it in except the case.
>
>If you've not taken apart a 120 before, be aware that one corner (forget
>which) you are supposed to leave the screw in, and you pivot one of the
>halves of the MP on that corner to expose the innards, IIRC. You don't
>undo all the screws and then lift the two halves separate. At least, I
>think it was my MP120 that I figured this out the hard way :)
>
>There's pictures of how to do this (take apart MP1x0) on the web.
>Somewhere. Perhaps related to: how to repair the MP130 power switch? or
>similar- I forget. A google search should still turn it up if you play a
>little.
>
>HTH.
>
>B
>
The James Elliott Newton Site
http://www.geocities.com/rootbeeraddict/newton.html
Is that a Newton in your pocket, or are you happy to see me?
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sat Dec 01 2001 - 20:02:44 EST