John M. Powell wrote:
>> ... promising an aluminum Newt!
> Hmm... titanium newt....
:-)
The aluminium shell could theoretically be made from standard plates and
L-profiles which are screwed together. This would look a bit strange, would
cause always black abrased traces everywhere, especially in pockets and on
all whithe clothes. But it would be very interesting since the Newton
electronics could be mounted together with e.g. a GPS receiver and a larger
accu set (GPS's need typically 8...18V).
-- With best regards / Viele GruesseMarco Mailand http://slsbd.psi.ch/timing
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Thu Nov 01 2001 - 10:01:45 EST