Gregory J. Wayman <gwayman_at_mac.com> wrote:
>
> I need some help setting up Ethernet/NBU on a Mac. I read the
> instructions on the page regarding Card setup for the Newton
> http://www.chuma.org/newton/ethernet/instructions.shtml
> Now what do I set the prefs in NBU and the Newt to?
>
> Here is what is happening: Appletalk is on in the chooser on the Mac, as
> well as being selected as Appletalk in NBU prefs.
>
> In the Newt's Dock the picker is connect via Appletalk. Connect to is
> "Work." Then it goes into this searching for Mac os computers gig, and
> then never sees anything. Am I missing a step somewhere?
>
> Greg
1. How are you connected? Thru a hub or crossover? Be sure your wiring is
correct. After you connect try turning appletalk off then on again in the
chooser. Also make sure the Appletalk control panel is set to Ethernet.
2. Start NBU first
3. on the Newt pick "Other computer" from the picker to look for your Mac.
HTH,
-- Michael Guzzo http://home.att.net/~michael.guzzo/newton/newton.html-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Wed Oct 03 2001 - 12:02:18 EDT