>Does anyone have a tip on how to keep my pen from falling
>out of my trusty 130?
>I've tried putting a new pen in since I had one laying around and
>thought the spring was probably shot in the old one.
The thing that retains the pen is not a spring, and it is not part of the
pen. It is a plastic clip that is part of the middle part of the case. It
snaps into the (groove? or is that for records only?) that is in the
1x0 pens about 15 millimeter away from the tip. Unless this groove
is not present or filled with some debris, the pen must snap in if the case
clip is ok.
If you look at http://www.pda-soft.de/130_disassembly08.jpg,
this is the case part in the bottom left corner. If you feel up to disassembling
your 130, I could send you that case part.
Good luck
Frank
-- Newton hardware and software at http://www.pda-soft.de
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Wed Jan 01 2003 - 10:02:59 EST
