----- Original Message -----
From: "aaron tester" <desktop_at_lavalink.com.au>
To: <newtontalk_at_newtontalk.net>
Sent: Thursday, June 06, 2002 4:19 PM
Subject: Re: [NTLK] LocalTalk/EtherTalk and Printer
>
> > But
> >there's an exception (only one? certainly not!): The LTB software doesn't
> >route well the LaserWriter thru to the ethernet branch, at least not with
> >Newton compatibility.
>
>
> i have it working here.
>
> i have an old centris 610 (low + wide!) running system 8.1 + localtalk
> bridge. i print from newton (ethernet) to laserjet 5mp (localtalk). jochen
> - what system is the host mac running? if it's an older system perhaps
it's
> something to do with classic networking vs. open transport? i am
absolutely
> 100% guessing here.
I have the System 7.5.3 with OpenTransport.
It's a Quadra 650 with internal Ethernet Card.
>
> what are your settings? here, they are (on the host mac):
>
> control panels:
>
> appletalk: ethernet
>
> localtalk bridge: on
> localtalk bridge - network access: public
Yes, like my setting.
>
>
> i did do a clean install when i set it all up.
>
> otherwise, i dunno??
>
> aaron
>
Perhaps System 8 is doing the trick.
Since I don't have one, I can't test it.
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:01:49 EDT