Don=B9t forget to set Airport to Ethernet bridging to allow AppleTalk to get
through.
G
On 3/12/02 1:01 PM, "Jake" <newton_at_10k.org> wrote:
>=20
>=20
> so I installed both drivers and it recognized the card. I even got the
> lights blinked twice. I still can't connect to my desktop mac that is on
> the ethernet for syncing or internet. Here is my setup.
>=20
> thin air ethernet
> newton |||||||||||| ABS ------------ G4(no airport)
> 10.0.1.5 10.0.1.1 running NCU on AppleTalk ethernet
> 209.20.21.188 209.20.21.187
> firmware 3.81
>=20
> The basestation is on channel 11 and with encryption off. Does I need to
> set the SSID on the newton? If so, how? any suggestions?
>=20
> I also revisted the website where the author put up
> "Uploaded file was wrong, sorry. Wait for a while"
>=20
> jake
>=20
>>=20
>> On Tuesday, March 12, 2002, at 01:08 AM, Robert Hoehn wrote:
>>=20
>>>=20
>>> Scott,
>>> That worked perfectly, thanks. I was on the right track about
>>> installing both drivers. My mistake was forgetting to turn off
>>> encryption on the Airport - doh! It was quite a rush to connect to
>>> google and check my email wirelessly!
>>>=20
>>> Rob
>>=20
>> So is yours working consistently? I haven't been able to connect since
>> the "noise incident."
>>=20
>> Scott
>>=20
>>=20
>>=20
>=20
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:02:40 EST