at the temporal coordinates: 3/25/02 12:58 PM, the entity known as Jon Glass
at jonglass_at_mac.com conveyed the following:
>> Second, the command key equivalents for outline mode can be found by
>> holding the command key for a second or two while the keyboard is
>> plugged in. The key equivalents are cmd-] and cmd-[ together with cmd-=,
>> I think (I'm doing this from memory). The first is "new entry, indent
>> one (e.g. sub-entry)," the second is "new entry, go back one (e.g. go up
>> in outline levels)," and the last is "new entry, at same level."
>
> Unfortunately, this is a 2.1 feature only. :-(
I was afraid of that!
So, are there truly NO cmd-key equivalents on a 130?? And if not, one
wonders if some enterprising young programmer looking to put a notch in
their belt might not whip up a package to patch up something in this area...
- Eric.
--Eric Strobel (fyzycyst_at_NOSPAM^mailaps.org)
===================================================================== Bioweapons? HA! I laugh at them!! *I've* cleaned the coffee urns at work!!!! =====================================================================
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:33 EST