This should go into Mr. PCB mans collection of ideas ...
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Marco Mailand
> Sent: Tuesday, March 26, 2002 10:17 AM
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] Replace speaker?
> SNIP <
> I tought of this several times but finally found it more useful to have a
> Mini-8 connector mounted into the little plastic cover. Unfortunately the
> Mini-8 is to big. What about this: Using a serial to USB adapter
> inside the
> Newton and having thus the Newton talking to USB? Probably is
> then a special
> USB driver needed and NCU will not talk to USB at all :-( But the
> USB could
> carry audio in/out too.
> With best Regards / Viele Gruesse!
> Marco Mailand
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:34 EST