If you start the dock application you have the choice between the present
available interfaces (serial, modem AppleTalk, IrDA) -> connect via
For an Ethernet connection you should use AppleTalk.
In Setup - Prefs you will find an entry AppleTalk and there you should be
able to chose > connect using EtherTalk < and than select the card type you
use.
If you cannot see your card type in the list or you do not have the choice
for AppleTalk using EtherTalk there is something wron with NIE installation
and/or your Ethernetcard driver.
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of David Abramowitz
> Sent: Tuesday, March 26, 2002 10:04 PM
> To: Newton
> Subject: [NTLK] NCU Port?
>
>
>
> What port does the Dock app on the Newt use to communicate with NCU. Yes,
> I'm still trying to figure out why I can't connect anymore...(Ethernet).
>
> Thanks,
> Dave
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:39 EST