[NTLK] Re - Newton cable

• Next message: Frank Gruendel: "[NTLK] Re - Websites on UNNA"
• Previous message: Tony Kan: "Re: [NTLK] Dongle-less file transfers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

>Dunno. Here is the materials list for the project:
>
>1 male (with pins) mini din-8 connector
>1 female (no pins) db-9 or db-25 connector

<snip>

These mini din connectors are nearly impossible to solder.
You'd be better off buying a standard Mac printer cable,
cutting it in the middle and solder a db-9 connector to one
half and a db-25 connector to the other half. That way
you'd have two cables which should be sufficient for
everything.

Newton hardware and software at http://www.pda-soft.de

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net

• Next message: Frank Gruendel: "[NTLK] Re - Websites on UNNA"
• Previous message: Tony Kan: "Re: [NTLK] Dongle-less file transfers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:45 EST