From: Daniel Padilla (
Date: Wed Oct 30 2002 - 17:30:26 EST

> P.S. Has anybody got Nokia 6310(i) to work via cable as a GPRS device?

        Yes! Just today I got a *new* 6310 for 50 Eur.

    In the phone, I had to edit the first access point to ""

    For the newton, I've used the regular serial setup. As explained here:

My setup looks like this:

Setup Name: GPRS
Protocol: PPP
Configuration: Server
Password: MOVISTAR
When closing, disconnect: after 5 minutes
Primary DNS/Name Server Address:
Alternate DNS/Name Server Address:
Domain Name: <None>

Login Script [9 Step(s)]
 Send: "AT"
 Wait For: "OK"
 Send: "AT+CGDCONT=1,"IP",""
 Wait For: "OK"
 Send: "ATD*99#"
 Wait For: "CONNECT"

Advanced Settings
 Port: Serial Port
 Baud Rate: 115200
 Parity: None
 Stop Bits: 1
 Hardware Flow Control: off

Logout Script [7 Step(s)]
 Send: "+++"
 Wait For: "NO CARRIER"

Daniel Padilla

This is the NewtonTalk list - for all inquiries
List FAQ/Etiquette/Terms:
Official Newton FAQ:

This archive was generated by hypermail 2.1.2 : Thu Oct 31 2002 - 12:04:46 EST