From: Peter H. Coffin (hellsop_at_ninehells.com)
Date: Mon Feb 24 2003 - 10:08:54 PST
On Mon, Feb 24, 2003 at 09:07:33AM -0500, Stocker, Michael wrote:
> If I where to take a Newton-PC serial cable with built-in Newton Interconnect connector apart, would I be able to:
> - Access all of the relevant connector's pins
> - Build a custom cable with power in and wake source?
"It depends" but probably not. Generally, cables intented for serial use
only carry the wires necessary for serial use, so there's probably a lot
of unconnected pins at the interconnect end, and you'd have to
disassemble the connector rather than the cable to get at them.
--
99. Any data file of crucial importance will be padded to 1.45Mb in size.
--Peter Anspach's list of things to do as an Evil Overlord
--
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Mon Feb 24 2003 - 11:00:01 PST