Re: [NTLK] Dead Newton

From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.nl)
Date: Tue Jun 03 2003 - 23:43:37 PDT


These are the SPEAKER cables.
You are searching on the wrong side of the Newt...

Johannes

> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Ed Kummel
> Sent: Monday, June 02, 2003 7:55 PM
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] Dead Newton
 
 
> Here is a picture of the "power wires" I'm talking
> about: (the red and black wires)
> http://newton.tek-ed.com/newtspeed/xtal2/img0008.htm
 
> I don't know if they really are "power" connections,
> but I do know that if I unplug this and try to power
> on the Newt, it will fail. In what capacity? I dont'
> know...it just...doesnt'!
> I found that mine had pulled out part way and was
> making an intermittant power cycling problem. I pushed
> it in as far as it could go and dabbed a little
> hot-melt glue on it.
> And just for good measure, I dabbed all the connectors
> on my MB with the glue as well.
 
> Ed

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Fri Jun 06 2003 - 08:25:16 PDT