Re: [NTLK] Newton II: A gentler approach

From: Karel Jansens (kareljansens_at_tiscalinet.be)
Date: Thu Mar 13 2003 - 12:01:18 PST


On Thursday 13 March 2003 23:47, don porter wrote:
> We used a flex cable thru the side of the case. If you look at the seam
> of the case where the lid is you can spot a small plastic plug. The
> plug was removed and we connected to the internal serial connection on
> the PCB.

I've often wondered about that one. Was it a soldered connection or was a
plug developed, so the MP could be easily disconnected?

-- 
Jazz.
========================================================
VapourSig.net 2003 has been postponed indefinitely
======================================================== 
-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Thu Mar 13 2003 - 12:30:00 PST