From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.int)
Date: Thu Nov 20 2003 - 07:06:55 PST
What concerns the hardware you need to make sure that your nice DB-9 to
Mini-DIN8 adaptor is wired as described here:
http://newton.pbk-solutions.de/produkte/kabel/internal_connections.htm
it is in german inly, but you should be able to read the table.
You can simply check your adapters wiring using a continuity tester or a
DVM.
Cheers
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Dave Bonhoff
> Sent: Thursday, November 20, 2003 2:03 AM
> To: NewtonTalk
> Subject: [NTLK] Serial connection to cell phone
> Yup, me again!
> This new cell phone of mine, a Motorola v60i, is data capable. A
> serial cable is available and I have a DB-9 to DIN8 adapter that came
> with a previous PDA. Is it possible to use this kind of arrangement
> with my SER-001 equipped 2100?
>
> I'm guessing that if it is possible, it will be a similar set-up as
> using my old IRDA Nokia phone and that I will have to experiment
> writing a login script. Will I have to remove the NIE Modem and Serial
> Module that was modified to work with Nitro? Anything else to be aware
> of?
> Thanks!
> Dave
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Thu Nov 20 2003 - 07:30:00 PST