[NTLK] Recell Emate Batteries

[Florian Voigt]

Glued at best. There‘s nothing welded to it.

> Am 28.02.2018 um 22:54 schrieb Rufus Kohn <rufuskohn at gmail.com>:
> 
> I like the battery holder. I'm going to try it out. 
> 
> At the bottom of the battery pack there is a sensor welded to the batteries. I thought that was the heat sensor. My bad
> 
> All the best
> 
> Rufus Kohn
> 
> 
> 
> .
> 
> 
> 
>> Op 28 feb. 2018 om 22:28 heeft Piotrowski Paweł (Newton) <newton at indigi.co.uk> het volgende geschreven:
>> 
>> 
>>>> On 28 Feb 2018, at 20:29, Dan <dan at dbdigitalweb.com> wrote:
>>>> 
>>>> I think it is worth to try just buy cell package and change connector only.
>>>> 
>>>> http://www.ebay.co.uk/itm/4-8V-2500-5000mAh-SubC-SC-Premium-Racing-RC-NiMh-battery-pack-custom-connector/231497370017?hash=item35e65189a1:m:ms3rEyzXUL0R0ELThSC03tg <http://www.ebay.co.uk/itm/4-8V-2500-5000mAh-SubC-SC-Premium-Racing-RC-NiMh-battery-pack-custom-connector/231497370017?hash=item35e65189a1:m:ms3rEyzXUL0R0ELThSC03tg>
>>>> 
>>>> I will buy one and try to do the test.
>>>> 
>>> 
>>> That package won't work.
>> 
>> Electrically will work.
>> 
>>> At least it will need more than changing just
>>> the connector.  You will need to solder in the original temperature
>>> sensor as well requiring to rip apart the whole package.
>> 
>> You don’t need solder thermistor, because it is just sticked on tape.
>> 
>>> The dimensions are also questionable.
>> 
>> That will be a problem, but I found something else: https://www.ebay.co.uk/itm/Battery-Holder-for-4-x-AA-UM-3-Batteries-Red-Black-150mm-Leads-2pcs-OM0523/252072429267?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D43781%26meid%3Dd680f8bf024c4cafac9b8ac93a8ea0be%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D391944806521%26itm%3D252072429267&_trksid=p2047675.c100005.m1851 <https://www.ebay.co.uk/itm/Battery-Holder-for-4-x-AA-UM-3-Batteries-Red-Black-150mm-Leads-2pcs-OM0523/252072429267?_trkparms=aid=222007&algo=SIM.MBE&ao=2&asc=43781&meid=d680f8bf024c4cafac9b8ac93a8ea0be&pid=100005&rk=5&rkt=6&sd=391944806521&itm=252072429267&_trksid=p2047675.c100005.m1851>
>> 
>> This holder have almost perfect dimensions. So, we only need 4x NiMH batteries to put inside, mount thermistor somewhere between NiMH batteries, and solder ‘positive’ and ‘negative’ cables to pins on original white connector. Piece of cake.
>> 
>> And if there will be need to replace NiMHs, that will be so much easer.
>> 
>> 
>> Best regards,
>> Pawel Piotrowski
>> 
>> Worldwide Apple Newton Users Map: http://user-map.applenewton.co.uk <http://user-map.applenewton.co.uk/>
>> 
>> NPDS Server: http://newton1.applenewton.co.uk:8079 (powered by Newton 2100)
>> NPDS Tracker Server: http://tracker.applenewton.co.uk:3680 <http://tracker.applenewton.co.uk:3680/> (powered by Raspberry Pi)
>> 
>> Facebook: https://www.facebook.com/applenewtonfan/ <https://www.facebook.com/applenewtonfan/> 
>> Instagram: https://www.instagram.com/AppleNewtonFan/ <https://www.instagram.com/indigi_newton/>
>> Twitter: https://twitter.com/AppleNewtonFan/ <https://twitter.com/indigi_newton/>
>> ----------------------------------------------------------------------
>> 
>> http://newtontalk.net/
>> http://twitter.com/newtontalk
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk