Christopher Browne wrote:
> ------------------
> >i have the appletalk pref set to
> >>farallon enet card and everytime i try to connect i immediately get a
> >>"-61001" error
> >
> >The -61000 error range is assigned to the Lantern DDK. I don't have
> >that with me, so I can't tell you what it means.
> >
> >Go into prefs and double-check your AppleTalk settings. Make sure
> >that your "Connect using" is set to EtherTalk, and the "Card" is set
> >to Farallon Enet PC Card.
> >
> >If they are, I'm not sure offhand of what's wrong.
> -----------------
>
> I have the same problem. I recently installed a Farallon 895 (thanks for
> the helpful guidance, Victor). I can print over ethernet but I get this
> error every time that I attempt to use NCU using Appletalk over ethernet .
> My connection settings are as Avi suggests. NCU works fine using Appletalk
> over Localtalk on the same Mac.
Just thought about it, I'm pretty sure that there is a control panel on the
Mac where you need to tell it to use AppleTalk over Ethernet. If you don't
remember doing that, check the AppleTalk control panel.
-Laurent.
=====================================================================
Laurent Daudelin
Developer, Object Factory, Substrate Fannie Mae
Phone: 703-833-4266 mailto:Laurent_Daudelin@fanniemae.com
Fax: 703-833-7555 Usual disclaimers apply
******************************************
This month's NewtonTalk brought to you by:
EVOTE.COM, the ultimate Political Junkie site on the 'Net.
The Clinton Administration, the George Bush
2000 Campaign, and almost every other major
U.S. politician has said something nasty
about us at some time. Find out why at:
http://www.evote.com
******************************************
Need Subscribe/Unsubscribe info?
Visit http://www.planetnewton.com
This archive was generated by hypermail 2b29 : Wed Mar 01 2000 - 00:00:07 EST