Oops! Sorry, I forgot about the PC thing, so scratch AppleTalk from the
PC...the only way I've gotten a PC and the Newt to talk is via a serial
connection with NCU, but not Ethernet. I don't think the Newt and PC can
talk on the same network because they don't speak the same language. Unless
maybe you've got an NT server somewhere which has AppleTalk support (which
is possible), then maybe it would work. I don't know if a stand-alone PC can
have the AppleTalk protocol installed on its own - I'm pretty sure you need
to be on a LAN where AppleTalk support is on the domain server.
- Dave
On 8/17/01 2:02 PM, "Dave Abramowitz" <underdog_at_erols.com> wrote:
> Depends on what you mean by "talk". If you mean, how I can I use NCU with a PC
> and a Newt over Ethernet, all the info is here:
> http://www.chuma.org/newton/ethernet/ After you've got the Newt set up, run
> NCU on the PC (you can get that at unna.org), set AppleTalk in the Newt Prefs
> to Ethertalk, set NCU on the PC to listen on AppleTalk, start up NCU, Connect
> from the Newt, and you're talking.
>
> - Dave
>
> On 8/17/01 1:46 PM, "Jerry Tom" <jerrytommygal_at_hotmail.com> wrote:
>
>>
>> Hi Folks,
>> Anybody there knows how to set up the 2100 & PC to 'talk' using ethernet?
>> Most people seem to be Mac users and I cannot find PC instructions.
>> All suggestions welcome,
>> REgards,
>> Jerry
>>
>> _________________________________________________________________
>> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>>
>>
>> --
>> This is the Newtontalk mailinglist - http://www.newtontalk.net
>> To unsubscribe or manage: visit the above link or
>> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sun Sep 09 2001 - 19:47:18 EDT