I'm using my company's box (beta tester). It's a combination of a Linksys
router, Zone Alarm Pro (firewall) and anti-virus (us, Trend Micro). It seems
to be dolling out IP addresses to all of the internal machines just fine,
accepting all connections. I've checked the config, and I can't see anywhere
to get really granular about DHCP. Doh.
- Dave
On 10/24/01 6:14 PM, "Victor Rehorst" <victor_at_newtontalk.net> wrote:
>
> On Wed, 24 Oct 2001, Dave Abramowitz wrote:
>
>> Hi, guys and gals. Are we ready to talk about Newtons again? Good. I've been
>> using NPDS for a while (uMP2K) now, without problems. Well, now that I'm
>> behind a router/firewall box, I had to switch my static IP on the Newt to
>> DHCP. When I try to start NPDS it says "Loading the DNCP Protocol" then I
>> get an error about 10 seconds later that says:
>>
>> Server
>> InetGrabLink
>> Internet Error -60088
>
> I believe -60088 is a DHCP error, to the effect that the Newton couldn't
> find a DHCP server (or didn't get a valid response, one of those). Are
> you using one of those standalone router boxes (like the Linksys) or a
> Linux or Windows box? Are you sure the DHCP service on that box is
> accepting connections from any machine on your internal network?
>
> --
> Victor Rehorst - victor_at_newtontalk.net - chuma_at_chuma.org
> NewtonTalk list administrator - http://www.newtontalk.net
> Will help you with your list problems - as long as you're nice.
>
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Thu Nov 01 2001 - 10:02:39 EST