[NTLK] Help! (Water spill!)

From: Daniel Padilla (daniel.padilla_at_wanadoo.es)
Date: Fri Apr 05 2002 - 16:20:46 EST


     That's the way the newton shows that a internal start-up test has failed.
 I got that after upgrading a MP2000 and some pins weren't well soldered.

     Have you tried cleaning the ROM board contacts?

     Daniel Padilla

> ----- Original Message -----
> From: "John Goggan" <jgoggan_at_dcg.com>
> To: <newtontalk_at_newtontalk.net>
> Sent: Friday, April 05, 2002 10:30 PM
> Subject: [NTLK] Help! (Water spill!)
>
>
> >
> >
> > Ok -- I just spilled (a small amount) of Diet Pepsi onto my NPDS-dedicated
> > MP2100! Now, it looked like most of the liquid was actually external. I
> > removed the ethernet card and wiped off the Newt -- everything seemed fine.
I
> > let it sit for a while -- and then put the card back in. As soon as I put
the
> > card in, the Newt reset -- and never came back.
> >
> > Now, whenever it has power -- the backlight flashes twice -- then a pause --
> > then flashes twice -- then a pause -- forever.
> >
> > I can't even seem to invoke a brainwipe from this state! Any ideas??
Doesn't
> > seem to matter if I do battery or AC -- as soon as it gets power, I get
> > <flash> <flash> <pause> <flash> <flash> <pause> ...
> >

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Sun May 05 2002 - 14:02:51 EDT