Mimi,
Mac emulation is dead simple if you have Windows. Basilisk runs on anything,
and since we know you have a Mac, I'm sure someone on the list can get you
set-up with the Roms and disk images right quick.
Take heart!
jw
-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of mmcipollone
Sent: Saturday, January 26, 2002 11:53 PM
To: newtontalk_at_newtontalk.net
Subject: Re: [NTLK] Ethernet:say it ain't so,joe
quoting previous message..."Ethernet connections ONLY work with Macs, unless
you install a Mac
emulator on your Windows or Linux box. Others on the list, who are more
familiar with dark side, could give you instructions on that procedure"....
please tell me this is NOT true
mimi
windows 2000 owner
who has heard of mac emulation programs, but has a feww other things to
learn first...and doesn't want to have to go there..at least yet
----- Original Message -----
From: "Stephen Jendraszak" <stevehj_at_mac.com>
To: <newtontalk_at_newtontalk.net>
Sent: Saturday, January 26, 2002 9:18 PM
Subject: Re: [NTLK] Ethernet
>
> Yes. Once you have purchased a compatible ethernet card, and installed
> the appropriate driver over a serial connection (and make sure you have
> installed all the components of Newton Internet Enabler 2.0 as well),
> you can connect to a Mac running NCU 1.o over ethernet. You do this by
> making sure that the Mac is set (in the AppleTalk control panel) to use
> EtherNet or EtherTalk, and that NCU is set to sync over AppleTalk, On
> the Newton, use the Prefs application to set AppleTalk to Ethernet, and
> select your card from the list. Then, in the dock application, set the
> Newton to connect using AppleTalk. Now connect the Newton and Mac using
> an Ethernet crossover cable, or plug them both into an ethernet hub. You
> are ready to sync at blazing speed!
>
> sj
>
> PS- Ethernet connections ONLY work with Macs, unless you install a Mac
> emulator on your Windows or Linux box. Others on the list, who are more
> familiar with dark side, could give you instructions on that procedure.
>
> On Saturday, January 26, 2002, at 08:28 PM, Nathan J Hunt wrote:
>
> >
> > How could I set up a Ethernet sync, if I had an ethernet card for my
> > eMate? Could I use NCU?
> > --
> >
> >
> > ,-----/----.
> > | O | O |
> > | / |
> > | (__ |
> > | \___|__/ |
> > '-----\----'
> > Some people say that I'm superficial, but that's just on the surface.
> > On one hand, I'm indecisive; but on the other, I'm not.
> > If there's one thing I can't stand, it's intolerance.
> > Prejudiced people are all alike.
> > Avoid cliches like the plague.
> >
> > --
> > This is the Newtontalk mailinglist - http://www.newtontalk.net
> > To unsubscribe or manage: visit the above link or
> > mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
> >
> >
> http://homepage.mac.com/stevehj
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Fri Feb 01 2002 - 16:03:19 EST