[NTLK] Sharp Expert Pad

• Next message: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Previous message: Laurent Daudelin: "Re: [NTLK] WEPPackage installations"
• Next in thread: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Reply: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Maybe reply: victor_at_newtontalk.net: "Re: [NTLK] Sharp Expert Pad"
• Reply: Philip Lord: "Re: [NTLK] Sharp Expert Pad"
• Reply: James Elliott: "Re: [NTLK] Sharp Expert Pad"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

In an auction I found a SEP for 0CHF + 10CHF S&H. The seller stated
following:
without Software, Datencable, AC adaptor etc.
ARM 610 32 Bit RISC Prozessor Taktfrequenz 20 Mhz
ROM 4 Mbyte
RAM 640 Kbyte
Infrarot Interface
RS-422 Interface
IC-Karteneinschub PCMCIA 2.0 Typ I oder II

Does anybody know which NOS is installed on this beast, if any is installed?
Is it worth to be bought? I probably wouldn't bother with any Pre-NOS2.0
device but it looks intriguing.

--
With best regards / Viele Gruesse
Marco Mailand
http://slsbd.psi.ch/timing
http://slsbd.psi.ch/~mmailand
https://www.paypal.com/refer/pal=YYD3VUXUVD2YG
-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net

• Next message: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Previous message: Laurent Daudelin: "Re: [NTLK] WEPPackage installations"
• Next in thread: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Reply: Gwen: "Re: [NTLK] Sharp Expert Pad"
• Maybe reply: victor_at_newtontalk.net: "Re: [NTLK] Sharp Expert Pad"
• Reply: Philip Lord: "Re: [NTLK] Sharp Expert Pad"
• Reply: James Elliott: "Re: [NTLK] Sharp Expert Pad"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:02:05 EDT