I was able to fit the Implant adjacent to the reset button. It seems to fit
there without any interference, but it also stresses the importance of using
shielded wire instead of the bare stuff that Pix provides. There isn't an
easy way to run the wires without them crossing over each other at one point
or another.
>From: "Johannes Wolf" >Reply-To: newtontalk_at_newtontalk.net >To: >Subject:
Re: [NTLK] SER-001 with Pix Solutions ov. >Date: Fri, 21 Jun 2002 15:12:04
+0200 >>>Where do you place (hide) the Pixsolution board if the SER-001 is
mounted >??? >>Johannes >>>>-----Original Message----- >>From:
newtontalk-bounce_at_newtontalk.net
>>[mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Woo Lee >>Sent:
Friday, June 21, 2002 2:30 PM >>To: newtontalk_at_newtontalk.net >>Subject: Re:
[NTLK] SER-001 with Pix Solutions ov. >>>>>>>>The sounds are higher pitch.
>>The pin sharing might allow the serial. >>The Pix's and SER-001 fit fine
inthe Newt. >>------------------ >>>anyone. The Implant doesn't affect it
andseems to work just fine. I = >>have >>>also been able to connect to my
Macthrough the SER-001 without disabling >>>theaccelerator. Many people say
the accelerator messes up the connection >>>through the interconnect port
(w/exterior dongle) so that you can't use a >>>keyboard or serial
connection.I don't know if the pin sharing fixes that >>>problem, or if the
problems with >>------------------ >>>>!ooW %-) >>Pres. of Los Angeles
NewtonUsers Group! >>lanug2000_at_yahoo.com
>>http://groups.yahoo.com/group/lanug2000 >>>>>>-- >>Read the List
FAQ/Etiquette: http://www.newtontalk.net/faq.html >>Read the Newton FAQ:
http://www.guns-media.com/mirrors/newton/faq/ >>This is the NewtonTalk
mailing list - http://www.newtontalk.net >>>>>-- >Read the List
FAQ/Etiquette: http://www.newtontalk.net/faq.html >Read the Newton FAQ:
http://www.guns-media.com/mirrors/newton/faq/ >This is the NewtonTalk
mailinglist - http://www.newtontalk.net >
----------------------------------------------------------------------------
MSN Photos is the easiest way to share and print your photos: Click Here[1]
--- Links ---
1 'http://g.msn.com/1HM505401/46'
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:02:49 EDT