Re: [NTLK] Fully disassemble?

From: Marco Mailand (Newton2k1_at_mac.com)
Date: Sat Jun 29 2002 - 05:50:24 EDT


Am 28.6.2002 17:32 Uhr schrieb "John Goggan" unter <jgoggan_at_dcg.com>:
> It appears that the metal housing and touchscreen are attached to the plastic
> with small plastic tabs -- but they don't seem to move enough that I could
> push them aside to detach it without breaking the tabs. Am I missing
> something?
Its exactly as you observed but you can detach it w/o breaking something. I
remember badly but I believe you have to start with the tab between the card
slots and slant the screen before you can pull it out side wards.

I have two Newtons waiting to be opened and have their jaggies cured. I'll
make a few notes for removing the display and put them on my Newton pages.

-- 
With best Regards / Viele Gruesse!

Marco Mailand

http://slsbd.psi.ch/timing http://slsbd.psi.ch/~mmailand/ https://www.paypal.com/refer/pal=YYD3VUXUVD2YG

-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:03:09 EDT