Re: [NTLK] fixing -10011 error?

From: Marco Mailand (Newton2k1_at_mac.com)
Date: Thu Mar 21 2002 - 18:09:49 EST


Am 21.3.2002 16:17 Uhr schrieb "Victor Rehorst" unter
<victor_at_newtontalk.net>:
> Sounds like a corrupt Package soup, yes. You'll most likely have to toast
> the card by opening Prefs, inserting the card, and aggreing to the pop-up
> that appears.
Before you might try to start without activating your packages by pressing
the stylus onto the lower left screen boarder during startup. It's a bit
tricky to get the right moment to disable the card pkgs too but it's not
impossible. And you should try to backup before erasing the card. On the
restore you should then unselect the system information.
In principle could you erase also your system soup but this would require a
soup editor and that you have all your S/N's stored somewhere outside the
Newton.

-- 
With best Regards / Viele Gruesse!

Marco Mailand

http://slsbd.psi.ch/timing http://slsbd.psi.ch/~mmailand/ https://www.paypal.com/refer/pal=YYD3VUXUVD2YG

-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:21 EST