> I usually use alcohol to remove any residue, afterwards
> I use a pencil eraser
> to make the contacts bright and shiny again.
Regarding the pencil eraser: You can do this safely with the
contacts on the board. As to the ribbon cable, in the earlier
models the contacts were made using a very thin layer of
carbon. If this is the same in the MP2x00's, the best thing
you can do is keep your hands off the contacts. Don't touch
them, don't try to clean them with anything.
Frank
Newton hardware and software at http://www.pda-soft.de
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:48 EST