Re: [NTLK] loose flat ribbon cable

From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.nl)
Date: Mon Nov 18 2002 - 02:43:55 EST


There is a little white or light grey plastic piece to fix the ribbon cable.
If you compare the connectors on your logic boards you can check if this is
missing on the logic board you actually use.
Exchanging this little plastic piece is possible (I did it).

Johannes

> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of captnewton_at_cox.net
> Sent: Saturday, November 16, 2002 7:42 PM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] loose flat ribbon cable

> Hi,
> After changing motherboards in my 2000u, the flat ribbon
> connecting the display keeps slipping out,causing vertical lines
> on the screen. Any secret to keeping it in place.
> Arne

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/



This archive was generated by hypermail 2.1.2 : Mon Dec 02 2002 - 22:03:03 EST