From: Brian (bmcewen_at_comcast.net)
Date: Sat Feb 01 2003 - 05:08:18 PST
>Search the Newtontalk archive for posts about a program called slowdown.exe.
>You will need to run multiple instances of this program to get your speed
>slow enough on the PC to pass data through the serial port to and from the
>Newton. How you run multiple instances is all described in the previous
>posts. Check it out and see if that answers your questions. If you get
>stuck, we're here to help.
I do all my sync'ing to my Macs, but there was also a post from someone
perhaps a year? ago now, detailing how to set your PC Serial port settings
(buffering etc) so that you could connect via serial port without needing
the slowdown.
I didn't save it 'cos I don't connect that way for myself, and XPort works
for my wife's work PC without needing slowdown, so I just set her up with
that.
It might be worth digging and checking the details and adding it to the
FAQ. I can't test it thoroughly at home since my only Windows machine at
home is outclassed in MHz by a factor of 10, compared to new machines :)
(not counting processor DISimprovements which subtract a little from the
current performance (last I read) :)
But IIRC the buffering and port changes mentioned, did make sense.
B
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Sun Feb 02 2003 - 20:30:00 PST