Re: [NTLK] LocalTalk <=> EtherNet

From: Marty (martyNT_at_barknaturalpet.com)
Date: Tue Feb 11 2003 - 16:23:29 PST


On Tuesday, February 11, 2003, at 04:07 PM, Andrew Beals wrote:

> On Tue, 11 Feb 2003 15:55:23 -0800, "Blair Rosser" =20
> <newton_at_7thfloormedia.com>
> wrote:
>> Asant=E9talk for 1/3 the price on ebay:
>>
>> http://cgi.ebay.com/ws/=20
>> eBayISAPI.dll?ViewItem&item=3D3401634051&category=3D171
>>
>> b
>>
>>> *cough* i need something cheap..
>
> Cheaper still is free (recycled) cable [straight ribbon cable will =20
> work for short runs .. dunno about house-distances] from a telephone =20=

> or ethernet install that got ripped out or was left over. Add in a =20=

> free hub from the dumpster, some connectors and you're golden.
>
There is no "cable" that will substitute. This (Asante localtalk =20
bridge) is a active bridge of two different physical media with two =20
different signaling schemes...

Also let me state again (please someone correct me if I'm wrong here... =20=

  I don't think this allows for shared internet from an ethernet source? =
=20
There is no control panel support for ethernet over localtalk other =20
then Mac/IP which requires a different gateway/router or an old mac =20
with ethernet to do that...

Marty

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Tue Feb 11 2003 - 17:30:01 PST