OK, so the archive is indeed useful. I found out I needed not only
this stuff but also NIE 2.0 and a soft reset.
So, I've got the card recognized, setup using appletalk, put in the
SSID, and no WEP for now. I've set up internet setup 2.0 for DHCP on a
generic connection using the WaveLAN IEE card, etc.
But no light on the card. At least it only turned on for 5 seconds or
so during as soon as its inserted, but none after that.
Any ideas?
Thanks,
Ed Dyer
On Monday, January 6, 2003, at 08:46 PM, Ed Dyer wrote:
> Newts,
> Another quandry: I've installed the wavelan package from here:
> http://www.ff.iij4u.or.jp/~ngc/eng/newtwave.htm
>
> for use with my Lucent Orinico/WaveLAN Gold.
>
> I've transferred it via irda from my Tibook with the DIL Tester
> (http://www.tempel.org/newton/#DILplugin )
> but get this error on startup:
> "Error!
> Unable to activate 802.11b WaveLAN since Newton Device Drivers are not
> in the system."
>
> I'll be trawling the archives on newtontalk.net, but does anyone have
> further advice on what to do in the meantime?
>
> I also get the message that the card cannot be used when I start the
> Newton (MP 2000)
> Thanks,
> Ed Dyer
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Sun Jan 26 2003 - 04:02:22 EST