From: Frank Gruendel (fg2_at_pda-soft.de)
Date: Sun Mar 02 2003 - 14:14:12 PST
> As I understood a good way to revert the Newton OS to=20
> default state is to perform a Hard Reset.
Correct. Not only a good way, but probably the only way.
You got the procedure slightly wrong. The correct way to perform a
hard reset is
Press and hold down the power switch, then press and hold down the=20
reset button for two seconds. Release the reset button. Continue=20
holding down the power switch until a message appears that asks=20
you if you really want to erase all data. Tap =93Yes=94. When you=20
see a second message asking you if you really want to continue=20
because you are going to lose all data, tap =93yes=94 (or "ok", not =
sure).
Frank
-- Newton Software and Hardware at http://www.pda-soft.de=20
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Wed Mar 05 2003 - 16:16:58 PST