From: Laurent Daudelin (laurent_daudelin_at_fanniemae.com)
Date: Mon Mar 24 2003 - 07:57:33 PST
You mean, the 2 contacts that are underneath the battery, when I insert it,
right? Darn! The springs inside that make contact with the battery are
pretty far. Don't know if I will be able to reach them without opening the
Newt, or maybe I'm missing something?
-Laurent.
-- =========================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ************************* Usual disclaimers apply ************************* On 24/03/03 10:43, "Johannes Wolf" <mp2100_at_mail-gw.estec.esa.nl> wrote: > There are two flat contacts on top of the battery pack. > Make sure they are clean and check the counterpart contact springs inside > the Newt when the battery pack is removed. > You might be able to bend them a little bit down without opening the Newt. > These are the contacts used to recognise the battery type and to measure the > battery temperature. -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Mon Mar 24 2003 - 08:30:01 PST