From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.int)
Date: Wed Nov 19 2003 - 04:46:25 PST
Yes, there is.
The most common thing is that the original extensions coming with NCU are
replaced with newer ones that do not work with NCU.
The easiest thing is to install NCU again or check for the version of
AppleTalk ADSP tool if you intend to connect via Ethernet or
Apple Modem Tool if you intend to connect via serial.
The co0ntrol panel "extensions on/off" shows the version.
For both you should have teh NCU version and not te one that comes with the
Mac OS.
Cheers
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Stevie
> Sent: Wednesday, November 19, 2003 11:44 AM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] Connecting MP 2100 to a "classic" PPC 7600 via
> modem-/printerport - problems
> Hello all,
> after a long time without newton I'm trying to connect my MP 2100 to
> a Mac PPC 7600 via Newton Connection Util 1.0.1 (as delivered on
> original CD). System on 7600 is OS-9.1.
> When I try to connect via modem- or printerport or via appletalk, I
> get always the same errror-message "12" and no connection.
> -Is there help?
> -What's the reason?
> I can't find a newer connection utility (is there one?)
> Thanks for help and advice in advance
> stevie
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Wed Nov 19 2003 - 06:30:00 PST