From: Luiz Pellanda (pellanda_at_mac.com)
Date: Fri Apr 16 2004 - 06:49:26 PDT
On 15/04/2004, at 20:29, Frank Gruendel wrote:
>> I have a question regarding the screen on a 2000.
>> The bottom two thirds has a fair amount of light
(...)
>
> You should also be aware that the misalignment problem
> you mention will in all likeliness not be fixed by
> polishing the display. This is an ailment that afflicts
> only 2x00 displays, and it can and does afflict like-new
> displays, too. You can compensate this problem to a certain
> degree by cheating during the calibration sequence. Depending
> on where the misaligned area is you need to tap slightly off
> the center of the X that is closest to that area.
> Don't ask me which direction, I always
> forget this. But the orientation is the same, e. g. in your
> case with the alignment offset vertically you'd need to tap
> either above or below the center of the X.
>
(...)
>
> Good luck
>
> Frank
>
Thanks Frank!
I (still...) use a Nwt 100 that had a pen misaligment and solve it by
your advice above.
Joint the good ones and you will be...
Cheers!
-- Luiz E. Pellanda Porto Alegre http://www.portoweb.com.br/pessoal/pellanda "A Smith & Wesson beats four aces" (Murphy) (subscribed also by G.W.Bush) -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Fri Apr 16 2004 - 07:00:01 PDT