From: Dan (dan_at_dbdigitalweb.com)
Date: Wed Feb 11 2004 - 08:42:04 PST
Well it depends on the voltage. If the card is 12v write then it will work
in your 130 without any problems. If it is a 5v card, your 130 can read it
but not write to it. If it is a 12v card you can erase it with the card app
built into the Newton. But you shouldn't need to as many packages that work
with a 2100 also work with a 130 (there are exceptions of course like
NewtWorks, Newt Glider, or other apps that only use 16 shades of grey). And
of course you can just delete the packages you no longer use as well.
-Dan
-----Original Message-----
From: Signwatcher
To: newtontalk_at_newtontalk.net <newtontalk_at_newtontalk.net>
Date: Wednesday, February 11, 2004 2:41 AM
Subject: Re: [NTLK] brand new newton 130 on ebay
*snip*
Also does anyone know how to erase liner flash that was
written on a 2100 so I can use it for my 130?
*snip*
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Wed Feb 11 2004 - 11:00:01 PST