From: John Osborne (tooz_at_oceanatlas.com)
Date: Sat Feb 14 2004 - 11:11:05 PST
Peter,
I have tried the steps you outline and again nothing happens but I did
find finally find the lights on the dongle. I suppose that's progress.
Can you tell me the exact Farallon card you have and I'll look for one
on ebay? Thanks.
oz
On Saturday, February 14, 2004, at 10:03 AM, Peter Cameron wrote:
> on 14/02/04 10:50 AM, John Osborne at tooz_at_oceanatlas.com wrote:
>> Occasionally, I have seen a light flash on the hub but never on the
>> card or RJ-45 Dongle--it has lights?
> I use a Farallon card (same as the 3Com just a different ROM) and
> the
> dongle has a light.
>
> To connect to your Mac.
> On the Newton:
> 1. In preferences --> AppleTalk select Connect using EtherTalk and
> Card
> (your card)
>
> On the Mac:
> In the AppleTalk control panel select your ethernet type.
>
> In NCU select AppleTalk and leave all of the other boxes unchecked
> otherwise it'll look for AppleTalk on the modem or printer port.
>
> Start NCU on the Mac.
> Start dock on the Newton and choose connect via AppleTalk then
> select
> connect to other computer. It should then start searching your network.
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Sat Feb 14 2004 - 13:30:01 PST