From: Frank Gruendel (fg2_at_pda-soft.de)
Date: Fri Jan 02 2004 - 17:17:18 PST
Ok folks,
I have always admitted that one of the things I am very bad at is
finding
things in the world wide web. This is why I need your help. It is for a
good cause because this information will help resurrect a couple of
Newton 2000 / 2100, and maybe one day it will help resurrect yours.
Could anyone help me with finding out the specs for
the smd (surface mount) fuse shown in the following picture?
http://www.pda-soft.de/2x00smdfuse.jpg
If you locate this datasheet, I will gladly publish your name and url
on the page that will eventually result from this project.
For those who don't have web access, but might know anyway: The fuse is
labeled
21 and (length x width x height) about 3 x 1.5 x 1.2 millimeter
(0.12 x 0.06 x 0.05 inches).
Considering the dimensions of the "wire" inside this fuse, I'd expect
it to be in the 1 Ampere range. Talking of fuses: Can anybody tell me
the
englisch words for how fast a fuse blows? This should be part of the
fuse's specification, in Germany there are
FF (Superflink) = very fast
F (Flink) = fast
M (Mittelträge) = medium
T (Träge) = slow
TT (Superträge) = very slow
Thanks in advance, everybody.
Frank
-- Newton Software and Hardware at http://www.pda-soft.de
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Fri Jan 02 2004 - 19:00:01 PST
