From: Newtopia (MicroSSG_at_Comcast.net)
Date: Sat Jan 24 2004 - 07:55:36 PST
Laurent, anyone who uses Linksys routers...
Log into the router via your web browser, http://192.168.1.1
If you haven't changed your login information it will be;
User name: empty or "administrator"
Password: admin
You'll now be presented with the "Setup" screen, select either "Status" or
"DHCP" from the top nav bar, then select "DHCP Clients Table", this will
present you with the currently active IP Addresses/MAC Addresses/Interface
in a new browser window, i.e.
Client Hostname IP Address MAC Address Interface
Delete
cisco voip dig/con 192.168.1.100 nn-nn-nn-nn-nn-nn Ethernet
curtisdell8100 192.168.1.101 nn-nn-nn-nn-nn-nn Ethernet
Curtissager 192.168.1.102 nn-nn-nn-nn-nn-nn Wireless
I also turned on the IP log from the "Log" menu, this records all incoming
and outgoing IP Addresses and the port they were using. In addition, I use
Norton Internet Security, and I capture all attempts there.
Both the "DHCP Clients Table" and the "Log" are stored in cache, so there is
a refresh button. This is handy if you engage the window and leave it open.
Regards,
Paul Curtis - USA/OR
MP 120 v2.0/130/2100
Michigan State Spartans - Go Green! Go White!
-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of Laurent Daudelin
Sent: Friday, January 23, 2004 11:36 AM
To: NewtonTalk
Subject: Re: [NTLK] Problem with WiFi
On 23/01/04 14:21, "David Schultz" <evil_genius_at_mac.com> wrote:
> On 1/23/04 1:11 PM, "Newtopia" <MicroSSG_at_Comcast.net> wrote:
>
>
> Mr. Laurent and associates, (notice no uncomfortable first names)
>
> - Open your router config page by typing the router IP number in your
> web browser.
>
> - Login with user name and password.
>
> - Click DHCP tab at the top
>
> - Click the large button labeled "DHCP Clients Table"
>
> This shows the current DHCP client info. However Linksys says this
> info is kept in temp memory on the router, so it may be empty.
>
> I guess its because I use a slightly more expensive firewall router,
> Netgear's FVS318. It has a lot more features, I assumed routers were
> all fairly similar, I didnšt think of the more consumer-oriented
> models. Very sorry for this confusion.
>
> Hth
>
> DVS
David,
Thanks for the info. Unfortunately, my router doesn't run a DHCP server,
since I assign static IP addresses. Would that work anyway with DHCP off?
-Laurent.
-- ======================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ************************ Usual disclaimers apply *********************** -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/ -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Sat Jan 24 2004 - 08:30:02 PST