Re: [NTLK] So where to (re)start?

From: Newtopia (MicroSSG_at_Comcast.net)
Date: Tue Jan 27 2004 - 09:19:30 PST


Joshua,

If you want to do this with a PC, then find a 486 DX2-66, put it on your
network with your other pc. On the Mac side, I'm not much help as my only
experience is drooling over the 20" IMac.

Regards,

Paul Curtis - USA/OR
MP 120 v2.0/130/2100
Michigan State Spartans - Go Green! Go White!
 

-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of Joshua Johnston
Sent: Tuesday, January 27, 2004 9:12 AM
To: newtontalk_at_newtontalk.net
Subject: [NTLK] So where to (re)start?

I've been on the list on and off a few times now, and picked up a Newton
almost a couple years ago now. I have a 2100 with a pretty decent battery,
all the connection cables, etc, but one glaring problem. I have seriously
unstable syncing. I either get hangs and freezes using serial to my PC
which makes me need a restart to free up the com port, or Error -28009
working with Escale on my Powerbook. I would definitely like to have Escale
working, vastly preferred to working more stability into the NCU for
Windows. What patches, and in what order, do I need to do things here in
order to get anything stable going? Sorting through the list and reading
UNNA's archive list just isn't seeming to give me the full picture of what I
need.
 
Is there any link to a sort of "Basic Updating" list for new Newton owners,
any kind of 10 step install guide that could act as a replacement for any
kind of "official" quick install?

--
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/
-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Tue Jan 27 2004 - 10:00:04 PST