From: noiseiskinky (grliot_at_tiscalinet.it)
Date: Fri May 14 2004 - 02:45:51 PDT
Hi all
thanx for info but I'm still not able to connect...
>
> On May 13, 2004, at 2:37 PM, Christian Armbruster wrote:
> <snip>
>> 1. Get Nitro 1.1 and all packages and install them on the Newton
>> 2. Go to "Internet Setup" in the Extras drawer
>> 3. Create a new "Generic" Setup
>> 4. Use "Seriel" as connection
> Serial? Don't you want to pick IrDA here?
this is my first doubt: how can I choose IrDA port? choosing serial
sounds a bit strange there is not an Irda option when I create a new
internet setup
anyway there is a way to test if I'm sending something via irDA when
ppp script start?
>> 5. Fill in the data, as you would do with a landline connection
>> 6. In the Loginscript, the first thing you must do is telling the
>> Newton which number or sequence it must send to the phone to initiate
>> the connection. I use a dialup GSM number for my local german provider
>> which is 22214. So the first command in the login script is SEND
>> ATDT22214 followed by a SEND (RETURN SYMBOL)
> Also the link I use for the t68i is here...
> http://marc.theaimsgroup.com/?l=newtontalk&m=102875729817763&w=2
>
> This is how the basic GPRS script looks. I setup the phone to connect
> on it's own first. If you are just dialing an isp that's even easier.
>
I' tryng to adapt some SE GPRS modem scrpts I've on my mac
> I could try using an IR setup too. Perhaps I will when I next see my
> wifes phone...
>
> Let us know how it goes.
> marty
>
>
thanx again
giovanni
> --
> This is the NewtonTalk list - http://www.newtontalk.net/ for all
> inquiries
> Official Newton FAQ: http://www.chuma.org/newton/faq/
> WikiWikiNewt for all kinds of articles:
> http://tools.unna.org/wikiwikinewt/
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Fri May 14 2004 - 03:30:01 PDT