Re: [NTLK] [MP2100] MODEMtoMODEM communication problem

From: nelson (bnelson6_at_valuelinx.net)
Date: Tue Nov 30 2004 - 22:25:22 PST


if you only connect at 300bps that is a sign that the data correction on the
comp side is on, need to make sure all data correction is off in modem
settings. This took me a while to figure out. you want no data correction, not
v.32 or anly thing trust me.

Bryan

arfalas wrote:

> Peter wrote:
> > Try adding F8 to your setup string. That *should* lock the modem into
> > V.32bis 9600 mode.

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/


This archive was generated by hypermail 2.1.5 : Tue Nov 30 2004 - 23:00:02 PST