From: Timothy Larkin (tsl1_at_cornell.edu)
Date: Wed Aug 03 2005 - 05:05:35 PDT
Just for the record, I have successfully used a Linksys Network PC
Card, WPC11, ver. 3, in the Newton 2100. This required, in addititon
to Hiroshi Noguchi's driver, <http://www.ff.iij4u.or.jp/~ngc/eng/
newtwave.htm>, the More Wi-Fi Cards and Lantern packages from <http://
www.kallisys.com/newton/morewifi/en>.
With this card, I can work with NCU over AppleTalk.
However, a problem remains using TCP/IP, which does not work. The
only clue I have comes from Mail V, which says "No protocol driver
for this link is available. Can't establish a link." To me this means
that there is no TCP/IP stack available, even though I have NIE 2
installed. This doesn't suggest to me a problem with the Wi-Fi card,
but perhaps it is the hardware.
Any suggestions?
Tim Larkin
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Wed Aug 03 2005 - 10:00:02 PDT