From: Johannes Wolf (mp2100_at_mail-gw.estec.esa.int)
Date: Fri Aug 26 2005 - 07:34:32 PDT
Sorry,
I stand back corrected.
There was something wrong in my memory...
Cheers
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Adriano
> Sent: Friday, August 26, 2005 4:06 PM
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] [ANN] NewtNAV + AQ-300 bundle
> Il giorno 26/ago/05, alle ore 10:13, Johannes Wolf ha scritto:
> I am afraid that in case the receiver uses the 5V power from the Newt -
> routed via the nice adapter - it will NOT work with the SER-001,
> because the
> SER-001 does NOT provide +5V on the connector.
> SER-001 replicate exactly all the functionalities present on the 9
> pin serial port on MP2x00 series (via interconnect dongle).
> When taking a look directly on the SER-001 board the 9th pin line is
> nicely present,
> routed from the LTC1323 serial chip to the serial socket.
> As some users can report about it, NewtLight is a clear example of an
> adapter taking benefits
> from the +5V line of the SER-001 connector, as the NewtNav does too.
> Regards,
> Adriano
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Fri Aug 26 2005 - 08:00:02 PDT