Re: [NTLK] MP2100 stops when rotating

From: Sonny Hung (sonnyhung_at_gmail.com)
Date: Tue Feb 01 2005 - 11:25:07 PST


On Tue, 01 Feb 2005 19:51:45 +0100, Peter <p.roemmele_at_gmx.net> wrote:

Peter,

I think you will be advised to reboot while disabling packages.
If you are able to rotate there then try the package in question.
If not a problem try enabling one package at a time to figure out
which package is the offend one.
Now If all those steps still encounter a problem you may need to do a Reset.
If a reset doesn't help then maybe a Hard Reset.
Now if non of these steps help last resort maybe a flush of your Flash
which would entails ROM board swap with say an English ROM.

I had a particular issue prior that could not be cured and after the
Flash was flushed all was well...

Though to me it sounds like a Flush of the Flash is what will be needed.

Hopefully I have not missed any possibilities... if I have someone
please fill in the blanks and/or correct me if there are any
mistakes...

-- 
God bless,
Sonny Hung
the Hung Family
-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/


This archive was generated by hypermail 2.1.5 : Tue Feb 01 2005 - 12:00:01 PST