From: Dan (dan_at_dbdigitalweb.com)
Date: Mon Jul 18 2005 - 20:14:30 PDT
> Try a soft reboot on your Newt immediately before initiating an NCU
> session.
>
> I have found it helps to make that session work reliably.
>
> I don't believe the -1 error has anything to do with the data.
>
> Joel.
There are other things to set as well. Go into your FIFO buffers and
set it on one mark from off (as close as you can get to off) and see if
that helps. I found this helped me a lot. Another thing to try,
freezing "active" packages like Tapbar, Dashboard, or other enhancements
that are usually "running" all the time. If you have several of these
running, sometimes it can cause connection problems. Not often but it
is another thing to try if you continue to have problems.
BTW- Joel is right -1 error is only a connection issue, and nothing to
do with corrupt programs or data.
-Dan
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Tue Jul 19 2005 - 06:00:02 PDT