Re: [NTLK] emate only starts with reset button

From: Tom W. (tom.wilkinson_at_weeklyzone.com)
Date: Wed Mar 23 2005 - 22:44:45 PST

• Next message: Les: "Re: [NTLK] Synchronising Names between a MP2100 and an Emate"
• Previous message: Michael Briley: "Re: [NTLK] emate only starts with reset button"
• In reply to: Michael Briley: "Re: [NTLK] emate only starts with reset button"
• Next in thread: Bruce Guthrie: "Re: [NTLK] (OT) DataRover"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Okay, good tip. When I shut the lid, I still hear the screen light buzz.
Is it difficult to replace this switch?
Thanks
Tom

Michael Briley wrote:

>Hey Tom,
>
>Check that the switch telling the eMate whether or not the screen is
>down is working. The easiest way might be to turn on the backlighting
>& shut it - if the screen stays lit while closed (you'll hear the
>buzzing), that's your problem.
>
>Cheers,
>-Mike
>
>
>
>>From: Tom W. (tom.wilkinson_at_weeklyzone.com)
>>Date: Tue Mar 22 2005 - 18:52:38 PST
>>
>>Anyone have an idea why an eMate would only start by pressing the
>>reset
>>button? I hard reset it okay, but still it only starts with reset
>>
>>

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/

• Next message: Les: "Re: [NTLK] Synchronising Names between a MP2100 and an Emate"
• Previous message: Michael Briley: "Re: [NTLK] emate only starts with reset button"
• In reply to: Michael Briley: "Re: [NTLK] emate only starts with reset button"
• Next in thread: Bruce Guthrie: "Re: [NTLK] (OT) DataRover"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.5 : Wed Mar 23 2005 - 23:30:00 PST