From: John Derbyshire (johnderbyshire_at_ntlworld.com)
Date: Sun May 15 2005 - 11:19:22 PDT
Stymied now: just tried NCU in Serial, then in AppleTalk. Neither
connected. The same physical links work fine with NewTen and CubePort.
Could any other Cube users on OSX out there with a set up that lets you
transfer data and text with NCU and a Griffin CubePort let us poor
benighted souls know how it's done?
Thanks
On 15 May 2005, at 18:08, Martin Joseph wrote:
>
> On May 15, 2005, at 2:23 AM, John Derbyshire wrote:
>
>> The Mac and Newt couldn't see each other with NCU, so I went on the
>> Griffin gPort site and it had Appletalk Bridge and Griffin's OSX
>> Appletalk Bridge patch to enable gPort to work with Appletalk. But
>> they
>> prevent Classic from booting up.
>
> You shouldn't need that. Try using the serial setting in NCU.
>
> I can't remember if Appletalk over localtalk (serial) works under
> classic, but I don't think so off hand.
>
> Appletalk is controlled by OSXs network setting and using the gport for
> appletalk from there isn't an option.
>
>
> NCU should work and be all you need to run from classic.
>
> Marty
>
> --
> This is the NewtonTalk list - http://www.newtontalk.net/ for all
> inquiries
> Official Newton FAQ: http://www.chuma.org/newton/faq/
> WikiWikiNewt for all kinds of articles:
> http://tools.unna.org/wikiwikinewt/
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Sun May 15 2005 - 14:30:01 PDT