Re: [NTLK] Holux GR-213 GPS mouse + Newton

From: Adriano (adriano.angelillis_at_gmail.com)
Date: Tue May 24 2005 - 05:33:31 PDT


Il giorno 23/mag/05, alle 20:25, DJ Vollkasko ha scritto:

Good! For AQ-300, pinouts are in the manual (see link from
http://tools.unna.org/wikiwikinewt/index.php/AQ-300 ). Don't know how
Holux
handles that...

The AQ-300 manual reports about the pinout of a 'standard' PS/2
connector,
but there's no mention about the pins used on its serial socket.
[infact when i made the NewtNav, i had to find the correct pinout
myself]

Then the Holux GPS connector (a PS/2 'female' socket, the same as
AQ-300) has a completely different pinout from the AQ-300's ,
which is completely different from the Polstar PGM-111 GPS connector (a
PS/2 'male' plug) pinout too.

Adriano

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/


This archive was generated by hypermail 2.1.5 : Tue May 24 2005 - 06:00:02 PDT