Re: [NTLK] Problem: screen sensitivity

This is a variation on the jaggies. If you are lucky you will find
that something is pressed between the case and the display. Try a
thin plastic card to remove.
In my case nothing short of a digitizer replacement worked.

Good luck
Woody

On Aug 29, 2006, at 10:56 AM, Lord Groundhog wrote:

> After enjoying my MP2100 for a little over a year, Newt seems to have
> developed a serious flaw. I can slightly adjust the alignment of
> my pen so
> that the upper third or so is aligned correctly, but now, as I get
> closer
> to the bottom of the screen it becomes more and more out of alignment.

>
> As I say, re-aligning the pen does not affect this and I'm now left
> without
> my extras. For the record, Newt has suffered no impacts or shocks
> that I'm
> aware of, nor any other untoward events.
>
> What do I need to do to make this right? I'm very dependent upon
> my 2100!
>

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/