From: John (OceanCity_at_mac.com)
Date: Mon Feb 06 2006 - 10:17:47 PST
Ooops! Sorry, the below (bottom line) is the wrong one for the serial
board fix. The correct URL is here:
http://www.1234zzzz.com/pub/SER-001-FIX.jpg
Again note, this is a very subtle issue, however the stress which may be
causing tension on the case is apparently enough (according to accounts
on this list) to create over time a CRACK in the case, so if you
installed one of the serial boards and noticed the case didn't quite
snap all the way back together upon reassembly you may want to
investigate this easy fix. John
>If you installed a serial board and
>you noticed that the back case didn't snap closed all the way then you
>may want to look at the following photos (courtesy of Frank Gruendel at
>fg2_at_pda-soft.de by permission) which indicates the exact places which
>need to be filed down:
>http://www.pda-soft.de/2x00_disassemble.html
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Mon Feb 06 2006 - 13:00:06 PST
